29
English
28
6.2 System Setting
3) OSD Setting
This submenu allows you to set the menu language, OSD transparency and Information
and Volume timeouts. <Figure 6-2-2>
- Transparency : Set the OSD transparency of the menu. (1% ~ 100%)
- Information Timeout : Select the display duration of the information banner. (1, 2, 3, 5 or
10 seconds)
- Volume Timeout : Select the display duration of the volume box. (1, 2, 3, 5 or 10
seconds)
- Exit Confirm Type : Set the Exit Confirm Type.(Always Yes / Popup(default Yes) /
Popup(Default No))
- Use Recall list : Store previous channels. If you press recall key on RCU then you will
show recall list.
<Figure 6-2-2>
6.2 System Setting
1) Time Settings
This submenu allows you to set your local time, wake up time, wake up channel and
sleep time.
- See (6.1 Getting Started 4) Time Settings) for detailed description.
2) Timer Manager
This sub menu allows you to set the on/off time of your receiver.
⊹
This submenu allows you to set on/off times of your receiver. To display the timer menu,
press the RED button while in the guide menu. <Figure 6-2-1>
⊺
Press / to select a timer’s parameter.
⊻
Press / to change the parameter.
- Timer No : Select the timer that you want to modify. (1- 8)
- State : Select the timer frequency. (off/once/daily/weekly)
- Date : Press to display a Calendar pop-up; Select a date
- Start Time : Input the time for your receiver power-on; use the NUMERIC buttons
- End Time : Input the time for your receiver power-off; use the NUMERIC buttons
- Channel : Press to display a Channel list pop-up; Select a channel
- File Name : You can change recording file name.
- Record : Set record On/Off.
<Figure 6-2-1>
To Next Page
Loading...