18
After Use
● Dispose of all used tubes and of the broken tube ends in the tube
opener in accordance with the Instructions for Use of the tubes.
● If necessary:
Clean the container of the tube opener and the tube holder with
clean water (only the lower, outlet end) and dry.
Technical Data
Carrying case
Dimensions (length x width x height) 350 x 300 x 85 mm
Colour black
Weight (with full contents) approx. 2 kg
Measuring unit
Dimensions (length x width) 100 x 38 mm
Height including
tube holder 230 mm
Connection for compressed air supply Press-fit nipple, 9 mm
Supply pressure
Minimum 3 bar
Maximum 15 bar
Volumetric flow
Factory-set at 3.0
+0.5
bar
For CO and CO
2
tubes 0.2 litres per minute
For Oil and H
2
O tubes 4 litres per minute
Adapter 1
Inlet Press-fit coupling, 9 mm
Outlet External thread G 1/4
Adapter 2
Inlet Internal thread G 1/4
Outlet Press-fit nipple, 12 mm
Environmental conditions 15
o
C to 25
o
C
1013 mbar
To Next Page
Loading...
Need help?
General
