Basics
Dräger X-dock 5300/6300/6600 9
Start screen: single mode activated:
4.4.1 Symbols
4.5 Logging users in or out
A user with administrator rights is created by default:
User name: admin
Password: 123456
To log in a user:
1. Select .
a. Select .
b. Select the desired user name from the list.
or
a. Select Select user.
b. Enter desired user name.
2. Enter the password and confirm with .
To log out the current user:
1. Select .
Information about the current user will be displayed.
2. Select .
The current user will be logged out.
Selected test ►◄
Log user
in or out
Instrument field ►
Menu Select this button to access the
menu (see chapter 6 on
page 19).
Confirm Select this button to confirm an
input or function.
Cancel Select this button to cancel an
input or function.
Back Select this button to access the
previous screen.
Log user in or out Select this button to log users in
or out. The number in the symbol
indicates the permission level
(see chapter 7 on page 23).
NOTICE
A User-ID is required to log in. This must be created
beforehand by the Administrator (see chapter 4.6 on
page 10).
NOTICE
Dräger recommends changing the admin password
after initial start-up.
NOTICE
When entering the user name, 3 already saved user
names will automatically be suggested and displayed.
For quick selection, please select the desired user
name.
i
i
i
i