Dräger DrugTest 5000 - Explanation of Symbols

8 Dräger DrugTest 5000 Test System
Description
2.6 Explanation of Symbols
2.6.1 Special symbols
2.6.2 Charge indicator, optical and acoustic signals (from firmware version 2.0.0
1)
)
When switched on, the charge status can be seen on the charge status symbol; when turned off, the Analyzer gives visual and
audible feedback.
optional: external printer can be used optional: Fast Mode
optional: external keyboard can be used optional: Sensitivity Mode
1) Contact your Dräger representative to perform a firmware update.
Display
Charge status
Keyboard lights are flashing
(Analyzer is switched off)
Tones
(Analyzer is switched off)
Mains connection established no signal
one short tone: connected
two short tones: disconnected
Restricted mains operation no signal no signal
Battery fully charged
Analyzer is connected to the mains
no signal
Battery 2/3 charged no signal
Battery 1/3 charged no signal
Battery almost empty prolonged tone at intervals of two minutes
Battery empty, emergency
operation possible
prolonged tone at intervals of two minutes
Battery completely drained prolonged tone at intervals of two minutes
Battery defective no signal no signal