Dräger FPS-COM 7000 - User Manual

Questions and Answers

A
Alicia StrongAug 30, 2025
What to do if the insert cannot be fitted or pulled out of Dräger Respiratory Product?
- D
  Debbie DanielAug 30, 2025
  If you are experiencing issues with fitting or pulling out the insert of your Dräger Respiratory Product, it could be due to several reasons. A screw might be blocking the insert; try lifting the screw. The insert path could be blocked; in this case, check the sealing and grease or replace it as necessary. Alternatively, the insert path might be generally obstructed; clear the path and carefully fit the insert. Also, the screw might not be completely loosened, completely loosen the screw, making sure that the spring below the screw can move freely, lift it if necessary.
K
Kevin MurphyAug 29, 2025
What to do if there is no connection via cable to radio possible with Dräger FPS-COM 7000 Respiratory Product?
- P
  pamelayoungAug 29, 2025
  If there is no connection via cable to radio possible with your Dräger Respiratory Product, the issue might be due to a faulty cable, which requires replacement. Alternatively, the cable might not be correctly fitted; in this case, check the connection between the cable and the radio, refitting if necessary. Also, verify the connection between the cable and the communication unit, refitting if needed. Finally, ensure you are using the correct cable for the connection.
S
Stephanie RodriguezAug 28, 2025
How to fix a jammed slide switch on Dräger FPS-COM 7000 Respiratory Product?
- O
  oconnortimothyAug 28, 2025
  If the slide switch is jamming, it may be soiled; dismantle and clean the slide switch. If that doesn't resolve the issue, the slide switch may be damaged and require replacement.
A
Amanda BradyAug 27, 2025
What to do if battery compartment of Dräger Respiratory Product cannot be closed or opened?
- P
  Paul GrayAug 27, 2025
  If the battery compartment is difficult to open or close, make sure the screw is completely loosened, lifting it if necessary. Also, check for any blockage of the cover and inspect the sealing, greasing or replacing it as needed. Ensure the path is clear, and carefully open or close the cover. The screw may also block the insert, so lift the screw.
J
Joel FlowersAug 27, 2025
What to do if Dräger Respiratory Product communication unit does not react anymore?
- C
  Carly AllisonAug 27, 2025
  If the communication unit stops responding, try pressing the ON/OFF button for at least 15 seconds to power it off. Alternatively, remove and then reinsert the batteries.
C
coxkarenAug 25, 2025
Why Dräger Respiratory Product has no voice amplifier unit?
- J
  Jessica ColemanAug 26, 2025
  The Dräger Respiratory Product may have no voice amplifier unit because Temporary HazMat mode is selected. Restart the communication unit without HazMat mode. Alternatively, the communication unit might be configured for HazMat mode. Change the configuration with PC software.
R
Roberto BushAug 25, 2025
What to do if Dräger Respiratory Product voice amplifier unit is too unclear?
- I
  ibarberAug 25, 2025
  If the voice amplifier unit of your Dräger Respiratory Product sounds unclear, it might be due to a soiled loudspeaker/membrane, so clean the communication unit. Alternatively, there might be water in the loudspeaker; allow the communication unit to dry.

Summary

Safety Information

General Safety Instructions

Provides essential information for the proper use of the communication unit.

Warning Symbol Explanations

Defines warning signs used in the document for user attention and safety.

Product Description

Overview and Components

Provides a visual guide to the communication unit's components and their numbering.

Technical Features and Functions

Details the technical specifications, functions, and operational capabilities of the communication unit.

Product Functionality and Usage

Communication Principles

Explains the functional principles of team radio and tactical radio communication.

Intended Use, Limitations, and Approvals

Covers the product's intended use, limitations, and provides information on product approvals.

Available Inserts

Lists the different types of inserts available for the communication unit.

Using the Communication Unit

General Operating Instructions

Covers unit behavior, status display, accessory connection, and power operations.

Switching On and Off

Details the procedure for turning the communication unit on and off.

Unit Operation and Configuration

HazMat Mode and Volume Adjustment

Details switching to HazMat mode and adjusting the volume controller.

Group Selection and Configuration

Explains how to select groups and configure the communication unit via PC software.

Preparations and Insert Fitting

Covers preparations for first use and fitting the correct insert.

Pre-Use Preparations

Fitting the Unit and Radio Pairing

Guides on attaching the unit to the facepiece and pairing it with a radio via Bluetooth.

Checking Readiness for Use

Outlines the steps to ensure the unit and radio are ready for operation before starting a shift.

During Use and Troubleshooting

During Use Guidelines

Provides cautions and notices for using the unit during operation, including Bluetooth connection interruptions.

Troubleshooting General Issues

Lists common faults like unit not switching on or no voice amplification, with their causes and remedies.

Troubleshooting Details

Voice and Earphone Issues

Addresses problems with voice amplification clarity, earphone volume, and output.

Bluetooth and Mechanics Troubleshooting

Covers Bluetooth pairing issues and mechanical problems with the battery compartment.

Maintenance and Troubleshooting

Unit Fitting and Cable Issues

Details troubleshooting for fitting/removing the unit, cable connections, and push-button/switch issues.

Maintenance Intervals

Specifies the recommended maintenance intervals for checking the unit's functionality.

Cleaning and Maintenance

Cleaning Procedures

Provides detailed steps for cleaning the communication unit and its components, including drying.

Maintenance Work Overview

Introduces maintenance tasks and highlights precautions for assembly work.

Component Maintenance

Battery and Earphone Replacement

Details procedures for replacing batteries and earphones, including safety warnings.

Fastening Eye and Unit Dismantling

Guides on replacing fastening eyes and dismantling the communication unit from the facepiece.

Transport, Storage, and Disposal

Firmware Updates and Transport

Covers installing firmware updates and methods for transporting the communication unit.

Storage, Disposal, and Technical Data

Provides guidelines for storing, disposing of the unit, and lists technical data.

Order List

Product and Accessory Ordering

Lists designations and corresponding order numbers for the communication unit and its accessories.

Warranty Information

Warranty Terms and Conditions

Outlines the warranty terms, conditions for claims, and the importance of following instructions for use.

Dräger FPS-COM 7000 Specifications

General

Operating Time	Up to 10 hours
Water Resistance	IP67
Frequency Range	400 - 470 MHz
Bluetooth	Yes
Hands-free Function	Yes
Approval	EN 137
Ambient Temperature	-30 °C to +60 °C
Loudspeaker Volume	Up to 95 dB
Product Type	Communication Device
Communication System	Digital radio communication
Compliance Standards	EN 137
Operating Temperature Range	-30 °C to +60 °C