DIAGNOSTICS (continued) NM2B
2.1 Service Menu Screen
To access the Service Menu Screen, press and hold the CONFIG key, and
(while holding the CONFIG key) simultaneously press the 21% and APNEA
ALARM DISABLE keys. These keys are located on the monitor control key
panel. The Service Menu Screen appears as shown in Figure 2-2. Access to the
other service functions is gained through the keys to the right of the service
screen which temporarily function according to their corresponding on-screen
labels.
Figure 2-2: SERVICE MENU SCREEN
SERVICE MENU DIAGNOSTICS
CALIBRATION
EXIT
TRACE
TREND
Rev. A
2-2
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS
To Next Page
Loading...
