Dräger PSS Series User Manual

Plus and PSS Series - Lung Demand Valve
tm 1285.001 - August 2001
5:1
5:1 Contents
Section Description
5.1 Contents
5.2 Service and Test Intervals
5.3 Cleaning, Disinfecting and Drying
5.3.1 Important Information
5.3.2 Cleaning and Disinfecting
5.4 Replacing Diaphragm
5.5 Replacing Positive Pressure Spring
5.6 Replacing Medium Pressure Hose
5.6.1 Removing Medium Pressure Hose
5.6.2 Assembly of Medium Pressure Hose
5.7 Replacing Injector Pipe
5.8 Replacing Air Transfer Block Assembly
5.8.1 Removing Air Transfer Block Assembly
5.8.2 Fitting Air Transfer Block Assembly – Lever Height Setting
5.9 Lubrication of Connector Assemblies - M40 and M45
5.9.1 Removing Connector Assemblies from LDV - M40 and M45
5.9.2 Disassembly of Connectors - M40 and M45
5.9.3 Assembly of Connector - M40
5.9.4 Assembly of Connector - M45
5.9.5 Assembly of Connector Assemblies to LDV - M40 and M45

Dräger PSS Series Specifications

General

Type	Self-Contained Breathing Apparatus (SCBA)
Material	Stainless steel
Breathing Gas	Compressed air
Duration	Varies by cylinder capacity and breathing rate
Cylinder Material	Aluminum or composite
Communication	Integrated communication system (optional)
Operating pressure	Up to 300 bar (4350 psi)