www.dragino.com
LPS8 LoRaWAN Gateway User Manual --- Update:2019-Oct-26 10 / 36
3 Typical Network Setup
3.1 Overview
The LPS8 supports flexible network set up for different environments. This section describes the
typical network topology can be set in LPS8. The network set up includes:
WAN Port Internet Mode
WiFi Client Mode
WiFi AP Mode
3.2 Use WAN port to access Internet
By default, the LPS8 is set to use the WAN port to connect to an upstream network. When you
connect the LPS8’s WAN port to an upstream router, the LPS8 will get an IP address from the
router and have Internet access via the upstream router. The network status can be checked as
below: