Need help?Do you have a question about the Dragino DLOS8 and is the answer not in the manual?
General| Model | DLOS8 |
|---|---|
| Category | Gateway |
| LoRaWAN Protocol | LoRaWAN 1.0.2 |
| Wi-Fi | 802.11 b/g/n |
| GPS | Optional |
| Max RF Output Power | 20 dBm |
| LoRa Frequency Bands | EU868, US915, AU915 |
| Ethernet | 10/100M Base-T |
| Power Input | 12V DC |
| Enclosure | IP67 |
| Sensitivity | -139 dBm |
Details the processor, RAM, and flash memory of the DLOS8.
Lists the physical and wireless interfaces available on the DLOS8.
Technical details of the LoRa radio, including sensitivity and demodulation capabilities.
Methods to locate the DLOS8's IP address for initial connection.
Instructions for connecting to the DLOS8's default WiFi Access Point.
General diagram illustrating DLOS8's connectivity options.
Setting up internet access using the DLOS8's WAN Ethernet port.
Displays system running status and network overview.
Selecting default or custom frequency bands for LoRa operation.
Setting up the DLOS8 to connect to servers like TTN or ChirpStack.
Specific instructions for connecting the DLOS8 to the LORIOT server.
Displays firmware version, system time, and connection status.
Viewing logs related to LoRa radio traffic and frequency usage.
Viewing system boot and operational logs for troubleshooting.
Links to further detailed instructions and guides.
Steps to connect to the DLOS8's Linux command line via SSH.
Guide on how to set custom frequency bands for LoRaWAN.
Instructions for connecting the DLOS8 to the LORIOT network server.
Information on creating custom firmware and accessing source code.
Discusses using 868MHz hardware with 915MHz bands and performance impact.
Troubleshooting guide for kernel errors when installing packages.
Steps to recover the DLOS8 if the firmware fails or crashes.
To Next Page
