www.dragino.com
DLOS8 LoRaWAN Gateway User Manual 10 / 47
2 Access and Configure DLOS8
The DLOS8 is configured as a WiFi Access Point by default. User can access and configure the
DLOS8 after connecting to its WiFi network, or via its Ethernet port.
2.1 Find IP address of DLOS8
2.1.1 Connect via WiFi
At the first boot of DLOS8, it will auto generate a WiFi network
called dragino-xxxxxx with password:
dragino+dragino
User can use a PC to connect to this WiFi network. The PC will
get an IP address 10.130.1.xxx and the DLOS8 has the default IP
10.130.1.1
To Next Page
Loading...
Need help?
General
