www.dragino.com
DLOS8 LoRaWAN Gateway User Manual 45 / 47
10.3 I configured DLOS8 for WiFi access and lost its IP. What to do now?
The DLOS8 has a fall-back IP address on its WAN port. This IP is always enabled so you can use the
fall-back IP to access DLOS8 no matter what the WiFi IP is. The fall back IP is useful for connecting
and debug the unit.
(Note: fallback IP can be disabled in the WAN and DHCP page)
Steps to connect via fall back IP:
1. Connect PC’s Ethernet port to DLOS8’s WAN port
2. Configure PC’s Ethernet port has
IP: 172.31.255.253 and
Netmask: 255.255.255.252
As below photo:
3. In the PC, use IP address 172.31.255.254 to access the DLOS8 via Web or Console.
Please note the latest firmware uses port 8000 for http and 2222 for ssh access.
To Next Page
Loading...
Need help?
General
