www.dragino.com
DLOS8 LoRaWAN Gateway User Manual 13 / 47
3 Typical Network Setup
3.1 Overview
The DLOS8 supports flexible network set up for different environments. This section describes the
typical network topology. The network set up includes:
WAN Port Internet Mode
WiFi Client Mode
WiFi AP Mode
Cellular Mode
3.2 Use WAN port to access Internet
By default, the DLOS8 is set to use the WAN port to connect to an upstream network. When you
connect the DLOS8’s WAN port to an upstream router, DLOS8 will get an IP address from the
router and have Internet access via the upstream router. The network status can be checked in
the home page:
To Next Page
Loading...
