www.dragino.com
DLOS8 LoRaWAN Gateway User Manual 39 / 47
7 Linux System
The DLOS8 is based on the OpenWrt Linux system. It is open source, and users are free to
configure and modify the Linux settings.
7.1 SSH Access for Linux console
User can access the Linux console via the SSH protocol. Make sure your PC and the DLOS8 are
connected to the same network, then use a SSH tool (such as putty in Windows) to access it.
IP address: IP address of DLOS8
Port: 22 (via WiFi AP mode) or 2222 (via WAN Interface)
User Name: root
Password: dragino (default)
After logging in, you will be in the Linux console and can enter commands as shown below.
The “logread -f” command can be used to debug how system runs.
To Next Page
Loading...
