www.dragino.com
LPS8 LoRaWAN Gateway User Manual --- Update:2019-Oct-26 12 / 36
Step3:
In the Network->Wireless page, disable WiFi AP network. This step is important, the LPS WiFi
interface can only WiFi AP or WiFi Client mode at a time.
Note: After doing that, you will lose connection if your PC connects to the LPS8 via LPS8’s WiFi
network.
After successful association, the WiFi network interface can be seen in the same page:
3.4 Check Internet connection
You can use the diagnostics page to check and analyze the Internet connection as shown below.
To Next Page
Loading...
Need help?
General
