The detail explanation of the SIP and Port settings window:
SIP Port
The port number used to send/receive SIP message for building a
session. The default value is 5060 and this must match with the peer
Registrar when making VoIP calls.
Registrar
Enter the domain name (or IP address) of your registered SIP
Registrar server.
Proxy
You can enter domain name or IP address of SIP proxy server. If this
setting value is the same as Registrar, please press “Duplicate”.
Domain/Realm
You can enter domain name or IP address of SIP URL. e.g., if SIP
URL is sip:63065@fwd.pulver.com, then this field contains
fwd.pulver.com. If this setting value is the same as Registrar, please
press “Duplicate”.
Stun Server
This setting defines whether the Vigor2200V/VG NAT traversal
mechanism is enabled (by checking checkbox) or not. If activated,
please also specify IP address of STUN server. Under this mode,
VoIP communication from Vigor2200V/VG can pass through with the
specified STUN server behind firewall/NAT.
Use Registrar
With the Registrar domain entered above, check this box to let the
Vigor2200V/VG use the SIP Registrar.
Display Name
This field contains a name or a number which easily let you identify
the person who you wan to call. It can also be the name for SIP
display.
Account
Name
Enter your SIP username (the first part of your SIP address before the
@ sign)
Authorization
User
This field contains a name or a number. It is also the name for SIP
Authorization. If this setting value is the same as Display Name,
please press “Duplicate”.
Password
Your SIP URL address as provided when you registered with a SIP
service.
Expire Time
The time duration that your SIP registrar server keeps your
registration record. Before the time expires the Vigor will issue
another register message to registrar server again.
To Next Page
Loading...
