6 7
EN EN
Self-Wash Base
Upper Cover
Water Tank Plug
Control Panel
Mop Pad
Washboard
Washboard Clips
Floating Ball
Filter Media
Control Panel
Clean Button
Return-to-Base
/ Exit Button
Display Screen
Product Overview
Clip
Clip
Waste Tank Fresh Tank
Press and hold the and buttons for 3 seconds to activate or deactivate
Child Lock. After Child Lock is activated, all buttons on the robot and the base
are locked.
Child Lock
Clean Button
Press briey to start or pause cleaning.
Return-to-Base / Exit Button
When the robot is on the base:
Press briey to make the robot exit the base.
Press and hold for 3 seconds to clean and dry the mop pads.
When the robot is out of the base:
Press briey to send the robot back to the base. The robot resumes
cleaning after the mop pads are cleaned.
Press and hold for 3 seconds to stop cleaning and send the robot
back to the base to have the mop pads cleaned and dried.
·
·
·
·
Dust BinSelf-Wash Base
Signaling Area
Charging Contacts
Power Port
Overow Sensors
Product Overview
Washboard Bracket
Overow Sensors
Self-Wash Base Back
Filter
Bin Cover
Bin Clip
· Push gently in the direction
indicated by the arrow to open
the cover
To Next Page
Loading...
Need help?
General
