Dreame H12 - Starting and Operating the Vacuum

11
EN
Note: When the vacuum is working, neither move it o the ground nor lay it at. Otherwise, the dirty
water may ow into the motor.
Do not recline the vacuum backwards more than 140° to prevent the vacuum from
leaking water.
Do not use to vacuum any foamy liquids.
＜140°
Auto Mode / Suction Mode
The vacuum is powered on by default in Auto mode, you can switch to the Suction mode
based on your needs.
Auto Mode: The vacuum can adjust its suction power depending on dierent situations.
Suction Mode: The vacuum can clean the water stains on the oor.
How to Use
Starting Cleaning
Briey press the button to power on, and the vacuum will start cleaning. The vacuum
comes with an upright/reclining switch. Please gently step on the brush cover and
recline the vacuum backwards to start operating. If the vacuum is in the upright position
while working, the current task will be suspended.