Dreame T20 - How to Use; Working Methods; Using Different Attachments

16 17
Cleaning the HEPA Filter
It is recommended to clean the HEPA 󽗉lter once every 4 to 6 months.
1. Remove the dust compartment as
shown in the 󽗉gure.
3. Clean the HEPA 󽗉lter with clean water.
Make sure you rotate the HEPA 󽗉lter 360°
to thoroughly and remove all dust caught
in the 󽗉lter. Lightly tap the 󽗉lter several
times to remove any excess dirt.
Note：
• Only use clean water to wash the 󽗉lter. Do not use detergent.
• Do not attempt to clean the HEPA 󽗉lter with a brush or 󽗉nger.
2. Remove the HEPA 󽗉lter from the vacuum
cleaner by pulling it down in the direction
shown in the 󽗉gure.
4. Allow the HEPA 󽗉lter to air dry for 24
hours.
2
1
12
6
111
57
210
48
39
24 hrs
12
6
111
57
210
48
39
24 hrs
Care & Maintenance
Installing the HEPA Filter
1. Insert the HEPA 󽗉lter into the vacuum
cleaner and gently press down, as
illustrated.
2. Reinstall the dust compartment.
Care & Maintenance