Dreame T30 Neo User Manual

18 19
ENEN
2. Use scissor to cut o󽗈 the hairs and 󽗉bers that
get stuck on the brush bar head. Wipe the dust
from the notch and transparent cover with a dry
cloth or paper towel. Thoroughly dry before use.
4. Stand the roller brush upright for at least 24
hours until it is fully dry.
Cleaning the Multi-Brush Bar
1. Turn the lock counterclockwise until it stops,
then remove the roller brush from the multi-
brush bar.
3. When it is dirty, rinse the roller brush with
clean water until it is clean.
Care & Maintenance
12
6
111
57
210
48
39
24 hrs
2. After unlocking the mini roller brush, remove it
from the mini motorized brush, then rinse and clean
the brush head.
4. Once the mini roller brush is dry, reinstall it by
following the disassembly steps in reverse.
Cleaning the Mini Motorized Brush
1. Use a coin as illustrated to rotate the lock
counterclockwise until you hear a click.
3. Stand the mini roller brush upright in a well-
ventilated area for at least 24 hours until it is
fully dry.
12
6
111
57
210
48
39
24 hrs
Care & Maintenance

Dreame T30 Neo Specifications

General

Cleaning type	Dry
Vacuum air filtering	-
Dirt separating method	Filtering
Suitable for all types of surface	Yes
Brush shape	Rectangular
Product color	Black, Grey
Dust container type	Bagless
Power source	Battery
Charging time	4 h
Battery voltage	29.6 V
Battery capacity	2.9 Ah
Power consumption (typical)	550 W
Vacuum brushes included	Mini motorized brush

Weight and Dimensions

Weight	- g