EasyManua.ls Logo

Dreame T30 Neo - Cleaning the Filter; Installing the Filter

Dreame T30 Neo
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16 17
ENEN
2. Remove the 󽗉lter from the vacuum by pulling
it down in the direction shown in the 󽗉gure.
4. Allow the 󽗉lter to air dry for 24 hours.
12
6
111
57
210
48
39
24 hrs
Cleaning the Filter
It is recommended to clean the 󽗉lter once every 4 to 6 months.
1. Remove the dust cup as shown in the 󽗉gure.
3. Clean the 󽗉lter with clean water. Make sure
you rotate the 󽗉lter 360° to thoroughly and
remove all dust caught in the 󽗉lter. Lightly tap
the 󽗉lter several times to remove any excess
dirt.
Only use clean water to wash the 󽗉lter. Do not use detergent.
Do not attempt to clean the 󽗉lter with a brush or 󽗉nger.
Note:
2
1
12
6
111
57
210
48
39
24 hrs
Care & Maintenance
2. Reinstall the dust cup.
Installing the Filter
1. Insert the 󽗉lter into the vacuum and gently
press down, as illustrated.
Care & Maintenance

Related product manuals