Dreame T30 Neo - Charging; Charging Methods; Battery Status Display

12 13
ENEN
Using Di󽗈erent Accessories
Multi-Brush Bar
Suitable for vacuuming on the med/low pile
carpets, tiles and 󽗊oors.
Note: The multi-brush bar can be attached
directly to the vacuum.
Mini Motorized Brush
For vacuuming dirt, pet hair, and other stubborn
debris from sofas, bedding, and other fabric
surfaces.
Note: It is not recommended to vacuum on
fragile surfaces, such as silk.
How to Use
2-in-1 Brush Nozzle Crevice Nozzle
For vacuuming dust from curtains, keyboards,
ceilings, sofas, vehicle interiors, co󽗈ee tables,
etc.
Suitable for vacuuming cracks, corners of doors
and windows, stairs, and other hard-to-reach
places.
Care & Maintenance
Tips:
1. Always use genuine parts to keep your warranty from becoming void.
2. If the 󽗉lter or nozzle becomes clogged, the vacuum will stop working shortly after being turned on.
To restore normal functions, clean the 󽗉lter and/or nozzle.
3. If the vacuum is not be used for an extended period, fully charge it, unplug its charger, and store it in
a cool, low-humidity environment away from direct sunlight. To avoid over-discharging the battery,
recharge the vacuum at least once every three months.
2. Push the dust cup release switch in the direction indicated by the arrow, then gently remove the dust
cup from the vacuum.
Cleaning the Vacuum
Wipe the vacuum with a soft dry cloth.
Cleaning the Dust Cup, Pre-󽗉lter, and Cyclone Assembly
The vacuum's cleaning ability will be reduced if the dust cup is 󽗉lled to the "MAX" mark. To regain
performance, empty the dust cup in a timely manner. Before emptying the cup, make sure the vacuum
is disconnected from the power, and do not press its power button.
1. Press the dust cup bottom cover release button, then empty the contents.
2
1
1
Note:
• If any rotating part becomes stuck, the vacuum may shut o󽗈 automatically. Remove any trapped
objects so the device can function normally.
• When the battery becomes overheated, the vacuum will automatically shut o󽗈. Wait until the battery
temperature returns to normal, then the vacuum will work normally.