54
OPERATION SCREENS
These screens appear during operation.
CHECKLIST SCREEN
This screen displays system checks performed
automatically by the Dremel LC40 Laser Cutter and
operator inputs that must be completed before a job
can be started.
TOUCH SCREEN
CHECKLIST SCREEN — ERRORS DETECTED
Displays errors detected in systems of the Dremel
LC40 Laser Cutter while it is preparing to start a job.
The status bar will also display red icons for system
or systems where errors were found.
Link to a trouble shooting tutorial related to
the system where an error was found.
To Next Page
Loading...
Need help?
General
