58
Tool Bar
IMPORT
Click to import a file or use the camera
capture feature to create a file or place a
picture of the Honeycomb Plate in the
background of the workspace. Alternatively,
the file can be dragged and dropped
directly into the workspace.
FILE – Use import/file to bring in a file as
typically done in other software programs.
For PDF files the options are to bring in only
cut files, only engrave files, or both. Select
the option from the drop down menu. All
other file types will default to either engrave
or cut based on their optimal application.
CAPTURE – Use import/capture to access
the camera capture feature. This can be
used to capture a picture of the actual work
piece on the Honeycomb Plate and place
the image into the background of the LC40
Control Software workspace. Additionally,
the camera can take a picture of a sketch
placed on the Honeycomb Plate, and
transform that sketch into a file which can
be engraved or cut.
UNDO
Click to undo most recent action/change.
REDO
Click to redo most recent action/change.
AUTO ARRAY
Choose the object to duplicate. Then click
and highlight the number of times to
duplicate the object.
DREMEL LC40 CONTROL SOFTWARE
To Next Page
Loading...
Need help?
General
