25/29
13. DISPOSAL PROCEDURES
The unit does not contain any harmful substances and should be disposed of following local regulations, including any
recycling information indicated on the components themselves.
14. ORDING INFORMATION
VIP5
VIP5 PANEL MOUNT 12/24V DC/AC
VIP5 PLASTIC BOX 110/230V~
15. MOVING AND SHIPPING
Use suitable padded packaging when shipping the VIP5 controller and ensure that no damage has been sustained before
reinstallation.
16. OPERATING PRECAUTIONS
Power supply
Any type of intervention must not be carried out before the unplugging of the machine from power supply.
Make sure that no one can start it up again during the intervention.
All the installed electric and electronic equipment, reservoirs and basic components must be grounded.
Flammability
The lubricant generally used in lubrication systems is not normally flammable.
However, it is advised to avoid contact with extremely hot substances or naked flames.
Pressure
Prior to any intervention, check the absence of residual pressure in any branch of the lubricant circuit as it may
cause oil sprays when disassembling components or fittings.
Noise
The device does not produce excessive noise, less than 70 dB(A) .
ATTENTION: It is necessary to carefully read about the instructions and the risks involved in the use of
lubrication machines.
The operator should make sure he fully understands the operating and safety procedures of the VIP5
controller and any connected machinery or devices.
To Next Page
Loading...
