DSC HS2128 - Page 164

Section 7: Programming Worksheets
o 6 – Armed Display
o 7 – Open Cancels Arming
EN
R 7 – Open Cancels Arming
o 8 – Audible Exit Delay for Stay Arm
[022] System Options 10
Description on page 105
o 1 – [F] Key Option
o 2 – Not Used
o 3 – Not Used
o 4 – Test Transmission Counter in Hours
o 5 – Away to Stay Toggle
o 6 – 2 Way Full Duration
o 7 – Trouble Beeps Are Silent
o 8 – Keyswitch Arms in Away Mode
EN
R 8 – Keyswitch Arms in Away Mode
[023] System Options 11
Description on page 106
o 1 – Ready LED Flash for Force Arm
o 2 – Not Used
o 3 – Tamper/Fault Detection
o 4 – Access Code Required for [*][1]
EN
R 4 – Access Code Required for [*][1]
o 5 – Access Code Required for [*][2]
EN
R 5 – Access Code Required for [*][2]
o 6 – Access Code Required for [*][3]
EN
R 6 – Access Code Required for [*][3]
o 7 – Access Code Required for [*][4]
EN
R 7 – Access Code Required for [*][4]
o 8 – [*][6] Accessibility Option
[024] System Options 12
Description on page 107
NA
o 1– 50Hz AC / 60 Hz AC
EN
R 1– 50Hz AC / 60 Hz AC
o 2 – Crystal Timebase
EN
R 2 – Crystal Timebase
o 3 – AC/DC Inhibits Arming
EN
R 3 – AC/DC Inhibits Arming
- 164 -