Section 7: Programming Worksheets
o 4 – Tampers Inhibit Arming
o 5 – Real Time Clock Option
o 6 – Not Used
o 7 – Brownout Detection Enabled/Disabled
o 8 – DLS Disconnect
[025] System Options 13
Description on page 108
o 1 – European Dial
R 2 – Force Dial
o 3 – Test Transmission Counter in Minutes
o 4 – Not Used
o 5 – ID Tone
o 6 – Tone Generated-2100Hz
o 7 – 1 Hour DLS Window
o 8 – FTC Audible Bell
[040] User Authentication
Description on page 109
R 1 – User Code or Prox. Tag
o 2 – User Code and Prox. Tag
[041] Access Code Digits
Description on page 109
R 00 – 4-Digit Access Codes
o 01 – 6-Digit Access Codes
o 02 – 8-Digit Access Codes
[042] Event Verification
Description on page 109
01 – Burglary Verified Counter (Default: 002):
02 – Holdup Counter (Default: 002):
03 – Burglary Verification Selection:
001 – Police Code (Default)
002 – Cross Zoning
003 – Sequential Detection
7.8 Auto-Arm_Disarm
[151] Partition 1 Auto-Arm/Disarm
Description on page 110
001 – Partition 1 Auto-Arming Times:
24-Hour:
- 165 -
To Next Page
Loading...
