# of
Flashes
Trouble
# of
Flashes
Trouble
2 Panel Supervision Trouble 7 Receiver Not Available Trouble
4 Not Applicable 8 Receiver Supervision Trouble
5 Cellular Trouble 9 FTC Trouble
6 Ethernet Trouble 12 Module Configuration Trouble
NOTE: Only the highest priority trouble (2 flashes is the highest priority trouble) is indicated. When this trouble is
restored, the next highest trouble is indicated, if present. This will continue until all troubles have been
cleared (yellow LED is not flashing).
The following section describes the conditions associated with each trouble:
15