DSC PC3OOO - Page 35

31
PC3000 Version 7.51
[31] Access Code Group A Assignment Page 21
Default
On Zone Light 1
On
Zone Light 2
On
Zone Light 3
On
Zone Light 4
On
Zone Light 5
On
Zone Light 6
On
Zone Light 7
On
Zone Light 8
[32] Access Code Group B Assignment Page 21
Default
On Zone Light 1
On
Zone Light 2
On
Zone Light 3
On
Zone Light 4
On
Zone Light 5
On
Zone Light 6
On
Zone Light 7
On
Zone Light 8
[33] Communicator Call Direction Options Page 21
Default
1 Zones Group A Alarms and Restorals
1
Zones Group B Alarms and Restorals
1
Access Codes Group A Openings and Closings
1
Access Codes Group B Openings and Closings
1
Priority Alarms and Restorals
1
Maintenance Alarms and Restorals
Enter:
[0] No transmissions for this group
[1] Call 1st phone number back up to 2nd (becomes 1st number only, when section [18] item [7] is on)
[2] Call 2nd phone number only
[3] Always call both phone numbers
[34] Software Reset EEPROM Memory to Factory Defaults Page 22
[35] Through [42] - For Future Use
Note: If zone light is on that access code is assigned
to Group A.
Access codes 9 to 16 are permanently assigned to
Group A.
Note:
If zone light is on, that access code is assigned
to Group B.
If zone light is on in both sections, the code is
common to both sides and will arm or disarm the
entire system.