DSC Power Series PC1616 User Manual

DSC Power Series PC1616 - Quick Guide
https://alpha.adt.com/help/20.html[11/8/2018 11:27:26 PM]
DSC Power Series PC1616 - Quick Guide
For a detailed review of the entire system, please view the DSC Power Series 1616 manual.
There are two variations of the keypad for this system. This quick guide contains information for both,
indicated by the use of ‘OR’ in the instructions.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
button.
To arm all sensors in STAY mode when you are not leaving the premises, press and hold the [STAY]
button OR enter your [security code] and do not leave the premises.
To arm all in NIGHT mode, where both the interior and exterior are armed, press [*] + [1] after first
Select

DSC Power Series PC1616 Specifications

General

Partitions	2
User Codes	48
Event Buffer	500 events
Keypads Supported	8
PGM Outputs	2 (expandable to 14)
Zones	6 on-board, expandable to 16
Communications	PSTN
Power Supply	16.5VAC
Battery Backup	12VDC