DSC WP8033 - Page 4

4 D-306048 WP8033 Installer's Guide
Device Locator
Helps you to easily identify the actual device
displayed on the keypad LCD display.
To read more on the Device Locator: see
the keypad User’s Guide
To use the device locator when bypassing
a zone or when clearing a bypassed zone:
see the keypad User’s Guide
To use the device locator when conducting
the periodic test: see the keypad Installer’s
Guide or the keypad User’s Guide
Guard key-safe
WP8033 is able to control a safe that holds
site keys that are accessible only to the site's
guard or Monitoring Station's guard in the
event of an alarm.
1. Connect the safe to the panel: see
section 3.8 Optional Expander Module
Mounting, Figure 3.8b
2. Configure the safe's zone type to
"Guard Zone": see the keypad Installer’s
Guide
3. Setup guard code: see the keypad
Installer’s Guide
Arming key
External system may control arming and
disarming of the WP8033 system
Connect the external system output to the
panel: see section 3.8 Optional Expander
Module Mounting, Figure 3.8b