DSE 8610 MKII User Manual

Description of Controls
057-254 ISSUE: 2 Page 94 of 188
4.2.3 GENERATOR
Contains electrical values of the Generator, measured or derived from the module’s voltage and
current inputs.
Press the Instrumentation Scroll buttons scroll through the Generator parameters.
Generator
50.0 Hz
Generator Voltage (ph-N)
Generator Voltage (ph-ph)
Generator Frequency
Generator Current (A)
Generator Load ph-N (kW)
Generator Total Load (kW)
Generator Load ph-N (kVA)
Generator Total Load (kVA)
Generator Single Phase Power Factors
Generator Power Factor Average
Generator Load ph-N (kvar)
Generator Total Load (kvar)
Generator Accumulated Load (kWh, kVAh, kvarh)
Generator Loading Scheme
Generator Phase Rotation
Generator Nominal
Generator Active Configuration
Load Demand Priority
Synchroscope display
Commissioning Screens

DSE 8610 MKII Specifications

General

Generator & Mains Frequency	3.5 Hz to 75 Hz
Display	LCD with backlight
Communication	RS232, RS485, Ethernet, USB
Inputs	4 analogue inputs
Outputs	Configurable x 8
Power Supply	8 to 35 V DC
Operating Temperature	+70°C
Dimensions	240mm x 181mm x 42mm
Magnetic Pick-up Voltage Range	0.5 V
Magnetic Pick-up Frequency	10, 000 Hz (max)
Protection Rating	IP65 (Front only)