Need help?Do you have a question about the DSE DSE7410 and is the answer not in the manual?
Details installation instructions provided with the product for a quick start.
Provides 'handout' sheets on specific subjects during training sessions.
Lists DSE product manuals available for download from the DSE website.
Lists third-party documents that are also referred to in this manual.
Defines shorthand notations for modules and details connector types and cable sizes.
Specifies minimum/maximum supply voltage, cranking dropouts, and operating current.
Outlines measurement types, sample rate, input impedance, and voltage/frequency ranges.
Details measurement type, sample rate, CT ratings, burden, and accuracy.
Covers digital inputs and analogue inputs like oil pressure, temperature, and fuel level.
Describes configurable outputs (C&D) and fixed outputs (A&B, E-J) for various functions.
Lists specifications for USB, RS232, RS485, CAN, and Ethernet ports.
Provides overall dimensions, panel cutout size, and mounting details.
Lists relevant BS, EN, UL, and IEEE standards the module complies with.
Details terminal functions on the rear of the module for user connection.
Describes connections for DC supply, fuel, start outputs, and relays E-J.
Details connections for analogue sensors like oil pressure, coolant temperature, and fuel level.
Covers connections for magnetic pickup, CAN bus, and DSENet expansion modules.
Details connections for load switching outputs and generator/mains voltage sensing.
Explains connections for generator current transformers for various fault measuring topologies.
Describes configurable digital inputs and the PC configuration interface connector.
Provides typical system wiring diagrams for various configurations.
Details connections for alternative AC topologies like single-phase and two-phase systems.
Explains connections for negative, positive, and floating earth systems.
Describes the controls and features of the DSE7410 auto start module.
Describes the controls and features of the DSE7420 auto mains failure module.
Provides a quick start guide to the module's operation for basic functions.
Explains how to scroll and view different instrument pages and status displays.
Details the module's control buttons for stop/reset, manual, test, auto, and alarm mute.
Provides a detailed explanation of each control push-button's function.
Explains how to start, run, and stop the generator manually.
Describes how the generator operates automatically based on mains status.
Details the stop mode function and how to override the ECU for diagnostics.
Explains how to prevent shutdown/trip alarms from stopping the engine for 'warning only' operation.
Covers non-critical status conditions that do not stop the engine.
Details latching alarms that stop the generator and require manual reset.
Describes overcurrent protection combining warning and IDMT curve trip levels.
Explains earth fault and short circuit protection using IDMT curves.
Covers configurable maintenance alarms based on engine run hours or calendar schedule.
Explains scheduler operation based on module mode (STOP, MANUAL, AUTO).
Details how to enter the main configuration editor, including PIN entry.
Explains how to navigate and change parameters using the front panel editor.
Lists adjustable parameters available via the front panel configuration editor.
Describes how to enter and edit parameters while the engine is running.
Lists essential checks before starting the system, including wiring and supply.
Lists common starting symptoms and their possible remedies.
Identifies issues when the generator will not take load and possible solutions.
Details common alarm symptoms and their corresponding possible remedies.
Covers troubleshooting for CAN, RS485, RS232, and Ethernet communication issues.
Addresses symptoms related to inaccurate generator measurements on the controller display.
Provides part numbers for purchasing additional connector plugs from DSE.
Provides part numbers for purchasing additional module fixing clips.
Provides part numbers for purchasing additional module sealing gaskets.
Details DSE DSENet expansion modules, their supported numbers, and part numbers.
Information regarding DSE's limited warranty.
Guidance on the storage, collection, treatment, recycling, and disposal of WEEE.
Details on restriction of hazardous substances and DSE's compliance efforts.
General| Model | DSE7410 |
|---|---|
| Display | LCD |
| Weight | 0.47kg |
| Magnetic Input Frequency | 10, 000 Hz (max) |
| Storage Temperature Range | -40°C to +85°C |
| Dimensions | 214 mm x 158 mm x 42 mm |
| Type | Control Module |
| Input Voltage | 8-35 V DC |
| Cranking Dropouts | Able to survive 0 V for 50 msec providing supply was at least 10 V before dropout and supply recovers to 5 V |
| Protection Rating | IP65 (with supplied gasket) |
| Communication | RS232, RS485, CAN |
To Next Page
