DSE 8610 MKII User Manual

Description of Controls
Page 97 of 188 057-254 ISSUE: 2
4.2.5 EXPANSION
NOTE: Depending upon the module’s configuration, some display screens may be
disabled. For further details of module configuration, refer to DSE Publication: 057-243
DSE8610 MKII Configuration Suite PC Software Manual.
Contains measured values from various input expansion modules that are connected to the DSE
module.
Press the Instrumentation Scroll buttons scroll through the Expansion parameters if
configured.
Oil Temperature
80 °C
176 °F
DSE2130 Analogue Inputs (Only appears if configured)
DSE2131 Analogue Inputs (Only appears if configured)
DSE2133 Analogue Inputs (Only appears if configured)

DSE 8610 MKII Specifications

General

Generator & Mains Frequency	3.5 Hz to 75 Hz
Display	LCD with backlight
Communication	RS232, RS485, Ethernet, USB
Inputs	4 analogue inputs
Outputs	Configurable x 8
Power Supply	8 to 35 V DC
Operating Temperature	+70°C
Dimensions	240mm x 181mm x 42mm
Magnetic Pick-up Voltage Range	0.5 V
Magnetic Pick-up Frequency	10, 000 Hz (max)
Protection Rating	IP65 (Front only)