Dual DT 210 USB User Manual

Connecting the record player
12
Connection to the amplifier
 Connect the cinch (RCA) audio cable 14 to the
LINE/AUX or phono jack on the amplifier.
Note:
Make sure that you make the correct left and right
channel connections (red = right channel, white = left
channel).
Connection to the computer
 Connect the USB terminal 16 with a free USB port
on your computer. Follow the instructions on p. 14.
Mains connection
 Insert the mains plug into a socket.
How to set the PHONO/LINE switch
 Move the PHONO/LINE switch 15 to PHONO if the
record player is connected to the PHONO jacks.
 Move the PHONO/LINE switch 15 to LINE if the
record player is connected to the LINE jacks.
Removing/attaching the stylus
protection cap
 Before playing a record, you must remove the stylus
protection cap from the pickup 7. To do so, pull off
the cap forwards.
 It is recommended that you put the stylus cap back
on after playing a record to protect the stylus.

Dual DT 210 USB Specifications

General

Product color	Black
Nominal speeds	33, 45 RPM
USB version	2.0
USB ports quantity	1
Power supply type	AC
AC adapter frequency	50 Hz
AC adapter input voltage	230 V
Power consumption (typical)	3 W
Mac compatibility	Yes

Weight and Dimensions

Depth	348 mm
Width	360 mm
Height	95 mm
Weight	2750 g
Product dimensions (WxHxD)	360 x 348 x 95 mm