Dual DT 210 USB User Manual

How to digitalise your music
15
How to digitalise your music
Installing the software
Start your computer, insert the CD and install the
Audacity software.
Check the website to see if an update is available
(http://audacity.sourceforge.net
) and if there is, install the
update.
Connecting the record player
Connect the record player's USB terminal 15 with an
open USB port on your computer. Use the USB cable
provided.
Setting up the software
1. Start the Audacity software.
2. In the menu, select [Edit] and [Preferences].
The software settings open.
3. Click the [Audio I/O] tab:
4. Select your internal sound card as the playback
device.
5. Select USB Audio CODEC or "Microsoft
Soundmapper Input" as the recording device.
6. Select [Channels] 2 (Stereo).
7. Click [Play other tracks while recording new one], so
that a tick appears in front of it.
8. Click [Software Playthrough], so that a tick appears in
front of it.
9. Click OK.

Dual DT 210 USB Specifications

General

Product color	Black
Nominal speeds	33, 45 RPM
USB version	2.0
USB ports quantity	1
Power supply type	AC
AC adapter frequency	50 Hz
AC adapter input voltage	230 V
Power consumption (typical)	3 W
Mac compatibility	Yes

Weight and Dimensions

Depth	348 mm
Width	360 mm
Height	95 mm
Weight	2750 g
Product dimensions (WxHxD)	360 x 348 x 95 mm