Dual MGH20 - Mounting and Wiring

2
MGH20 INSTALLATION
Mounting & Wiring
Please read entire manual before installation.
Before You Start
• Disconnectnegativebatteryterminal.Consultaqualifiedtechnicianforinstructions.
• Avoidinstallingtheunitwhereitwouldbesubjecttohightemperatures,suchasfrom
directsunlight,orwhereitwouldbesubjecttodust,dirtorexcessivevibration.
Getting Started
• Onceasuitablelocationhasbeendetermined,drilltheholeandsecurethestereo
usingthemetalmountingbracket.Ifthebracketneedstobeshortened,removethe
appropriatenumberofbreakawaysegmentsusingapairofpliers.
Fuse:
Whenreplacingthefuse,makesure
newfuseisthecorrecttypeand
amperage.Usinganincorrectfuse
coulddamagetheradio.
Tip:
Whenasuitablegroundwireis
notpresentinthevehiclewiring
harness,connecttheblackground
wiretothevehiclechassis.
Break Lines
Color Connection
Red 12VIgnition/Accessory
Black Ground
Blue Remote Turn-on B (+)
Grey RightFront(+)
Grey/Black RightFront(-)
White LeftFront(+)
White/Black LeftFront(-)
Violet RightRear(+)
Violet/Black RightRear(-)
Green Left Rear (+)
Green/Black Left Rear (-)