18
XDM290BT OPERATION
Bluetooth
®
Operation
The unit supports A2DP (advanced audio distribution profile) wireless streaming
audio from your Bluetooth mobile device directly to your head unit. You can also
control your music from the front panel of the head unit using AVRCP (audio video
remote control profile).
Notes:
• To stream music to your head unit, your mobile device must support the A2DP
and AVRCP Bluetooth profiles. Check the owner's manual of your mobile device for
details.
• Streaming audio must be enabled from your mobile device. This option will vary
depending on the device. Some devices allow streaming audio to be disabled.
After pairing, connecting and enabling streaming audio from a compatible mobile
device, begin playing music using the music player on your mobile device. Once the
music is playing, the following functions can be used to control the music:
• The
ll
button will skip to the next available audio track.
• The
nn
button will skip to the previous audio track.
• The
l
/
II
button will toggle between play and pause during playback.
Note: Some Bluetooth devices may not fully support these commands.
Streaming Audio Operation
To Next Page
Loading...
Need help?
General
