Brakes
Front
Type: with drilled steel disc.
no. 2 discs.
Disc diameter: 320 mm.
Hydraulically operated by a control lever on handlebar
right-hand side.
Brake callipers with separate pistons.
Make and type: BREMBO P4.32 K 4 Pistons.
Friction material: FERIT I/D 450 FF.
Master cylinder type: PR 16/2.
Cylinder Ø: 16 mm.
Rear
Type: with fixed drilled steel disc.
Disc diameter: 245 mm.
Hydraulically operated by a pedal on RH side.
Brake calliper: 34 mm Ø cylinder.
Make and type: P 34 C
Friction material: FERIT I/D 450 FF.
Master cylinder type: PS 11.
Cylinder Ø: 11 mm.
Warning
The brake fluid used in the brake system is
corrosive.
In the event of accidental contact with eyes or skin,
wash the affected area with abundant running water.
144
To Next Page
Loading...
