Ducati Monster 795 - Erase DDA

Erase DDA
This function deletes all data from the DDA: the data
logger must be connected to vehicle wiring.
To erase data, enter the menu page "Erase DDA".
If button (1,Fig. 9) is pressed in position B " " for 3
seconds and the DDA analyser does not acquire data,
the instrument panel will display the word "WAIT…"
for 10 seconds; after these 10 seconds, the "ERASE
OK" word will be displayed for 3 seconds, to confirm
that the DDA data have been erased.
If button (1,Fig. 9) is pressed in the B "
" position for
3 seconds while the DDA data logger is acquiring
data, the data logger memory is not erased and the
display shows message "FAIL" for 3 seconds.
47