At Key-On, the instrument panel always shows the
following information (de-activating any previously
activated functions):
ODOMETER
SPEED
RPM BARGRAPH
With the button (1, Fig. 9) in position B " " the
Odometer function will cycle through the following
functions:
TRIP
TRIP FUEL
CLOCK
before returning to TOT function.
Pressing button (1, Fig. 9) in position A "
" gives
access to the MENU and the following functions are
displayed one after another:
ERROR (only if active)
BATT
RPM
LIGHT SET
LAP (OFF or ON)
LAP MEM
Fig. 9
DDA (OFF or ON)
ERASE DDA
CLOCK SETTING
CODE (only if active)
Important
This menu is active only if the speed of the
motorcycle is less than 20 km/h; if this MENU is open
and the speed of the motorcycle exceeds 20 km/h,
the instrument panel automatically exits the menu
and returns to the initial display.
26
To Next Page
Loading...
