When the LAP function is set to Off in the menu, the
current "lap" is not stored.
If the LAP function is active and the display is
suddenly switched off (Key-Off), the LAP function is
switched off automatically (even if the timer was ON,
the lap in progress is not saved). If the timer is not
stopped, when it reaches 9 minutes, 59 seconds and
99 hundredths, it restarts from 0 (zero) and continues
until the function is switched off. If however the LAP
function is switched on and the memory has not been
cleared, but fewer than 30 laps have been saved (e.g.
18 recorded laps) the display records any left lap until
memory is full (in this case 12 further laps can be
recorded). This function only displays lap times;
however, lap times are saved for subsequent display
in the Lap Memory function.
To Next Page
Loading...
