Adjustment of rear suspension rebound and
compression damping
This function allows changing Electronic Suspension
(DSS) rear shock absorber compression/rebound
setting for every single riding mode.
Access the customisation page by selecting "Rear"
and press button (4).
When you access the function, all possible
customisation levels (Hardest, Harder, Medium,
Softer, Softest levels) are listed on the left and the
currently set level is shown on the right. The following
selectable indications will be displayed in this page:
-
Back
- Hardest;
- Harder;
- Medium;
- Softer;
- Softest.
-
Back
The motorbike profile with the part where you will be
acting highlighted in Light Blue will also be displayed.
With button (1) or (2) select the new level of
intervention desired. For each highlighted level, the
corresponding paired value in the central table
(highlighted with a black arrow ) will be displayed.
Once the desired level is highlighted, press button (4)
to memorise the new selection.
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4).
Customising the Riding Mode: Motorcycle
Load Mode
Hardest
Harder
Hardest
Sport > Suspension > Rear
Medium
...
COMFORT PERFORMANCE
Back
42
1
Fig. 71
141
To Next Page
Loading...
