Ducati MULTISTRADA 1260 - Function Buttons

Function buttons
1) UP CONTROL SWITCH " "
Button used to display and set instrument panel
parameters with the position " ".
2) DOWN CONTROL SWITCH " "
Button used to display and set instrument panel
parameters with the position " ".
3) HIGH-BEAM/FLASH BUTTON (FLASH) (Fig. 9)
The high-beam flash button may also be used for LAP
functions.
4) CONFIRM MENU / SETTING MENU ENTRY
BUTTON
Button used to confirm during MENU navigation.
5) CRUISE CONTROL BUTTON - ON/OFF
Button used to switch the Cruise Control function on/
off.
5
41
2
7
6
Fig. 8
41