Ducati MULTISTRADA 1260 - Customising the Riding Mode: Reset to Default Settings (ALL DEFAULT)

Customising the Riding Mode: Reset to
default settings (ALL DEFAULT)
This function allows restoring all the default values for
ENGINE, DTC, ABS, DWC, DQS and all riding modes:
the function is only visible if at least one of the
parameters of one riding mode is not the “default”
one.
Enter the SETTING MENU.
Select Riding Mode by pressing button (1) or (2).
Once function is displayed, press button (4).
Use buttons (1) and (2) to highlight and select “All
Default”, press button (4) to reset to default values
for all four Riding Modes.
From this moment (and until one or more parameters
are customised) the "All Default" indication is no
longer visible.
To exit the menu and go back to previous page
highlight the "
Back" indication and press button
(4).
Riding Mode
Info Mode
Pin Code
Exit
42
1
Fig. 76
Enduro
...
All Default
Urban
Enduro
Back
42
1
Fig. 77
148