11) GENERIC ERROR WARNING LIGHT
It turns on when there are any "vehicle" errors, i.e.
active errors triggered by any control unit other than
the engine control unit.
12) DTC INTERVENTION (AMBER YELLOW)
DTC
No intervention Light OFF
Spark advance cut Light steady ON
Injection cut Light steady ON
13) OVER REV / IMMOBILIZER SYSTEM
Over rev
No intervention Light OFF
First threshold (N
RPM before the limit-
er kicks in)
Light steady ON
Limiter Light ON flashing
Note
Each calibration of the Engine Control Unit may
have a different setting for the thresholds that
precede the rev limiter and the rev limiter itself.
Immobilizer
Key-ON status Light OFF
Key-OFF status Light ON flashing
Key-off status for over
1 hour
Light OFF
32
To Next Page
Loading...
