List of operations and type of interven-
tion
[set mileage (km/mi) or time interval *]
Km. x1000
1 15 30 45 60
Time
(months)
mi. x1,000 0.6 9 18 27 36
Visually check the fuel lines 12
Check rubbing points, clearance, freedom of movement
and positioning of hoses and electric wiring in view
12
Lubricate the levers at the handlebar and pedal controls 12
Change coolant 48
Visually check the coolant level and sealing of the circuit 12
Check tyre pressure and wear 12
Check the battery charge level 12
Check the operation of all electric safety devices (side
stand sensor, front and rear brake switches, engine kill
switch, gear/neutral sensor)
12
Check lighting, turn indicators, horn and controls 12
Activate LED front lighting (if any) through DDS 2.0 12
Reset the Service indication through the DDS 2.0 -
Final test and road test of the motorcycle, testing safety
devices (ex. ABS and DTC), Cruise Control device, elec-
tric fans and idling
12
Softly clean the motorcycle 12
369
To Next Page