- DWC system: the "DWC" message followed by
the level of intervention set ("1", "2", "3", "4", "5",
"6", "7", "8") in case the DWC is active or by "off" in
case the DWC is disabled;
- DSS front suspension: “FRONT lettering
followed by set compression and rebound for the
fork (only for versions with electronic
suspensions);
- DSS rear suspension: “REAR” lettering followed
by set compression and rebound for the rear
shock absorber (only for versions with electronic
suspensions);
- rear shock absorber spring preload: PRELOAD
lettering followed by set spring preload (from 01
to 24) for the rear shock absorber (only for
versions with electronic suspensions);
- DQS system: the "DQS" message followed by the
level of intervention set ("UP/DW") in case the
DQS is active or by "off" in case the DQS is
disabled.
The displayed information is the settings stored for
every single Riding Mode. The stored settings may be
the Ducati default settings or the ones customised by
the owner.
Now, every time button (1) or button (2) is pressed the
instrument panel scrolls the other Riding Modes
(SPORT, TOURING, URBAN and ENDURO) and "
EXIT". If, for instance, the starting Riding Mode is
SPORT, by pressing button (2) the instrument panel
highlights TOURING, URBAN, ENDURO and "
EXIT" to then go back to SPORT; by pressing instead
button (1) the instrument panel will highlight "
EXIT", ENDURO, URBAN, TOURING to then go back
to SPORT.
Once the desired riding mode is selected press
button (4) to memorise the new Riding Mode.
66
To Next Page
Loading...
