44
INDEX PARTS NO. DESCRIPTION QTY AREA
19 E7309 Control Panel Cable ( 16 pin ) 1
20 E7401-M Nip / Notch Motor Power Connector - male 2
21 E7401-W Clamp Motor Power Connector - female 2 G6001
22 E7402-M Main Motor Power Connector - male 1
23 E8301 Control Panel Tag 1
24 E8405 Wiring Hose with Wires 1 G6001
25 E7311 Terminator 1
26 E7310 Safety Switch 1
27 E7314 Emission Suppressor 1 (PCB cable/sn2/ls3/ls4) 2
28 E7313 Emission Suppressor 2 (control panel cable) 4
29 E7315 Power Chord Fastener 1
30 E7316 VR Nipping Pressure Control Knob 1
8. Assemble Parts List
The following parts have to order in assemble:
PARTS NO. DESCRIPTION ASSEMBLED
PARTS
PAGE
G1001 Nipping Station Body Assemble E1002, E8102 6
G1002 Nipping Slide Block Assemble E1024, E8108 6
G1003 Nipping Hinge Shaft Assemble E1011, E8103 6
G1004 Cover Ruler Assemble E6110, E8402 6
G1005 Nipping Motor Assemble E7102, E7401-W 6
G2001 Glue Wheel Assemble U2010, U2011 4
G2002 Glue Accumulator Assemble U2012, U2013 4
G2003 Glue Adjustment Assemble U2018, U2019 4
G3001 Notching Cover Linkage Assemble E3006, E6303,
U3004, U3006,
U3007A
3
G4001 Driving Shaft Slide Assemble E4002, E8106 9
G4002 Main Motor Assemble E7101, E7101-G 9
G4003 Chain Shaft Assemble E8101, U9007 9
G4004 Glue Drum Assemble E8105, U9006 9
G4005 Bumper Assemble E4008-1, E4008-2,
E4008-3, E4008-4,
E8206
9
G5001 Clamp Wheel Assemble E5003, E8101 8
G5002 Clamp Front Worm Assemble E5009, U5009,
U5010
8
G5003 Clamp Right Worm Seat Assemble E5010, E8101 8
G5004 Clamp Left Worm Seat Assemble E8101, U5001 8
G5005 Clamp Left Worm Assemble E5006, U5007 8
G5006 Clamp Right Worm Assemble E5007, U5009 8
G6001 Wiring Hose Assemble E7401-W, E8405 10
To Next Page
Loading...
