Duplo DBM-100 User Manual

43
5. SETTING NON-STANDARD PAPER
shift
+
After adjusting the side jogger, be sure
to move this unit and adjust the collator's
paper line to the side jogger paper width
mark by pressing the shift key and side
jogger position key simultaneously.
When calling the memorized size again,
if the paper line and paper width mark do
not correspond, it means that the
positions of the collator and this unit are
wrong.
Move the unit and correct their positions.
While referring to “4-8. Raising Binding
Accuracy”, perform jogging to move the
side jogger inside, and at this position,
press the side jogger position key until
the inner line of the side jogger reaches
the paper size of the test set.
Remark : For side-stapling and corner-stapling, the
paper size and side jogger scale sizes will
differ. Refer to the following.
Adjust the side jogger to the side jogger
scale as follows for the following paper
sizes.
For A5 paper : A4
For A4 paper : A3
8

Duplo DBM-100 Specifications

General

Brand	Duplo
Model	DBM-100
Category	Folding Machines
Language	English