22
7. OPERATION PROCEDURES
10 Press the “test” button and perform
test folding.
• Two sheets of paper will be folded.
Even after two folded sheets of paper have
been ejected, the machine will not stop
working when the stop button is pressed until
the buzzer sounds and the motor inside stops
completely.
The unit will not respond to whatever button
on the control panel is pressed.
• The paper will be folded properly if it is folded
after it has reached the stopper inside the folding
plate.
• If the paper flowing into the folding plate is folded
without reaching the stopper due to conditions
such as environmental conditions (temperature,
humidity), paper quantity, its type, paper couch
conditions, folding speed, curling etc., it may not
be folded properly.
• In some cases, the paper may also coil around the
rubber roll and cause problems.
• As such problems can be corrected by decreasing
the folding speed, keep decreasing the speed until
the paper is folded properly.
To Next Page
Loading...